How do I easily set up my EXIT frame pool?

The choice has been made; your garden is going to have an EXIT Toys frame pool in it. But how do you best set up an above ground frame pool and what things do you need to take into account in advance? EXIT Toys lines up the most important steps for you, so you can quickly enjoy endless summers of swimming fun!

A proper preparation is half the work

Setting up your metal frame pool starts with a proper preparation. We are happy to explain the steps to you

Step 1: Choose a good place for your frame pool

Before setting up the frame pool, it’s important to determine where you want to place it. EXIT Toys is happy to explain what would be the best place for your pool:

 

✔ Place the frame pool on a flat and stable surface, like grass or a tiled part of the garden.

✔ Make sure the surface is straight, so the water level is even and there won’t be an unnecessary pressure on one side of the pool.

✔ Preferably, choose a place with direct sunlight so you can enjoy nice and warm frame pool water even quicker.

✔ Sweep the place where your frame pool will be with a broom.

 

EXIT tip: place a groundsheet underneath the frame pool. A groundsheet protects the frame pool from damage caused by the growth of weeds and prevent grass or sand from sticking to the liner. That way you’ll enjoy your frame pool extra long.

 

Step 2: Check whether you have all the parts

At this point it’s wise to check if you have all the parts. Check by means of the manual, which you can find in one of the boxes, whether you’ve received all the parts. Do you have them all? Great, then you can now start setting up your above ground pool.

 

Is there a part missing? Then wait with setting up your frame pool and contact our customer service.

Setting up the frame pool

Now you’re well-prepared. Let the set-up begin! EXIT Toys guides you in setting up the frame pool, connecting the frame pool pump(s) and filling the pool.

 

Step 3: Setting up the frame pool

Yes, you can start setting up your frame pool. We recommend doing this together with someone else. This is faster and sometimes you can use a pair of extra hands.

 

In the manual of your frame pool we describe exactly how you can set up the frame pool. If you follow these steps, you will certainly succeed.

 

Attention: Do you have a rectangular pool of 100cm or taller and does it seem like the corners are loose? Don’t panic! Our rectangular pools have corner parts with a smaller diameter than the tubes they are in. This space is necessary so the water can divide evenly. Due to this, we prevent the liner from tearing. Once you fill the frame pool with water, the pool will expand and the extra space will reduce.

 

Step 4: Connecting the filter pump (and the heat pump)

Now that the pool has been set up, but not yet filled with water, it’s time to connect the filter pump. This is also the moment to connect a heat pump. In any case, be sure to do this before the water reaches the lowest connection point in the wall of the pool. We understand that you cannot wait to jump in, but connecting the pumps is just easier done above water!

 

To make sure the tubes of the filter pump won’t come loose, it’s important to first attach the entrance and exit sieve to the inside of the frame pool. This can be a bit tricky, but by pushing and turning at the same time, it gets much easier. You can also put some vaseline on the sieves, so things will go smoother.

 

Our filter pumps are provided with two hoses. One hose to let the water of the frame pool run towards the pump and one to allow the filtered water to flow back into the frame pool. These hoses are identical. Thus it doesn’t matter which hose you use where. The same thing applies to the extra hose of the heat pump. So useful!

 

 

Step 5: Filling the frame pool

You’re almost there! The last step is filling the frame pool with water. We give you the final tips:

 

✔ This tip is only relevant if you have a frame pool with a canopy or a dome. Place the leg supports underneath the legs of the frame pool before you can fill the frame pool. Namely after filling the pool it’s quite difficult to lift one of the pool legs. We want to save you this effort. In the manual of your canopy or dome we explain to you how to attach the canopy or dome step by step.

✔ Place the end of the garden hose in the frame pool and turn on the water.

✔ Is your frame pool filled for about 2.5 cm? Then stop for a moment. It is now time to smooth out the creases from the bottom of the frame pool. Stepping into the pool and pushing the corners out with your foot helps too.

✔ Continue filling the frame pool until it’s filled to about 90%. Regularly check whether the legs and the hoses of the pump(s) are still tightly secured and how full your frame pool is, because you don’t want your pool to overflow.

 

Finally, your frame pool has been set up! So, what are you waiting for? Grab your swimming clothes and enjoy a plunge into the water. Enjoy! Be sure to also read our blog about keeping the water of your frame pool clean. That way you can always take a fresh dive!

Would you like more information? Call, email, or chat with us!

Do you have questions about our frame pools? Let us know, our customer service is here for you. Feel free to contact us through the chat, call 808 - 1893980 or send an email to info@exittoys.com. We are happy to help.